Most Wolf convection steam ovens draw from a tank that lifts out. You fill it, slide it back into its dock, and a small pump inside the appliance meters water into the steam generator as each program asks for it. When cooking ends, whatever is left goes back to the tank or collects in a tray you empty yourself. Nothing about that cycle touches the plumbing of the building, which is the detail worth knowing before you call anyone in a high-rise.
Why it matters here: in a condominium tower along Avenue of the Stars, cold water usually travels up shared risers that feed whole stacks of units. Closing a riser is something only the building's engineering staff do, often with notice posted for the neighbors above and below, and it is the kind of request that turns a simple appointment into a week of emails. When the oven is reservoir-fed, the repair normally stays within the oven and its surrounding cabinetry: the tank, the dock and its contacts, the level sensor, the pump, the internal hoses, the steam generator and the door seal.
We say normally because the installation guide and the model plate decide, not a general rule. A small number of built-in steam appliances on the market are plumbed to a supply line and a drain, and some kitchens were customized during a remodel. Before your visit, snap the rating plate printed along the door opening and look at the cabinet below the oven for any water connection. If there is none, the building probably never needs to hear the word "shutoff".