A range hood does not make smoke disappear. Its blower pushes kitchen air, with the grease, steam and heat in it, through the duct and outside. For every bit of air that leaves, the same amount has to enter the house somewhere else, or the pressure inside drops slightly below the pressure outside.
In an older, drafty house that replacement air leaks in through gaps around windows and doors, and nobody notices. A large modern home with tight windows, sealed doors and good insulation has far fewer gaps. The hood still tries to move the same air, but it now works against the house itself, so less air actually flows, and the air that does come in rushes through whatever small openings remain. That rush is the whistle you hear under a door.
This is what people mean by make-up air: a planned way for outside air to come back in when the hood runs, usually a damper or a fan that belongs to the home's heating and cooling system. Whether a particular home needs one, and what size, is a question for the mechanical engineer or HVAC contractor who knows the building and the local requirements. Our part is the hood: whether its motor, controls and the parts we service are doing their job.
Why this comes up in estate kitchens
-
Wide ranges, big hoods
Kitchens on the estates on either side of Sunset are often planned around large professional ranges and cooktops, with Wolf hoods sized to match. The more air the hood moves, the more the house's airtightness shows.
-
Renovated envelopes
Many large homes between Beverly Hills and Westwood have been renovated with modern windows and doors. A hood that worked quietly in the old house can start to whistle once the shell is sealed.
-
Houses closed while owners travel
Staff often keep every window and door shut when the family is away. A chef who switches the hood to high in a fully closed house is the person most likely to notice the change.
-
Blowers away from the kitchen
Some installations use an in-line or remote blower in an attic, a mechanical space or on the roof. Knowing where it is located before the visit saves time; ask the house manager or check the installation records.