When a house is rebuilt, the gas cooktop is one of the last things connected and one of the first things used. The supply to it and the cooktop itself belong to different people, and knowing which is which keeps the first weeks in a new kitchen safe.
Beverly Hills Wolf Specialists services Wolf gas and induction cooktops across the Palisades, in rebuilt homes and in houses that were spared. Ring (310) 496-3358 day or night, or reserve a slot online; technicians come out 8 AM to 6 PM, every day. Each visit costs $89, which is credited toward the repair, and you hear the repair figure only once the cooktop has been examined.
Smell gas? Leave first
Gas odor in the house? The cooktop comes second
Leave every burner, knob, valve, switch and lamp exactly as it is, and skip hunting for where the odor is coming from. Walk everybody out to the street first. From there, phone the gas company or 911. Booking a cooktop repair only makes sense after the gas side has been inspected and cleared.
Walk straight out; doors and windows are not your job right now
Hold off on phones, doorbells and garage remotes until you are well clear of the building
If a crew is working inside, tell them as you leave so they step outside with you
two
The gas supply versus the cooktop itself
In a newly built kitchen the work is split between trades. The dividing point is roughly the shutoff behind or under the cooktop: everything feeding it belongs to the house, everything after it to the appliance.
Gas utility, plumber or gas contractor
Restoring service and the meter to the house
Piping through walls, floors and the crawl space
The shutoff valve and the flexible connector behind the cooktop
Testing the new connections for leaks when the cooktop is hooked up
Any question about pressure or supply to the house as a whole
Wolf appliance technician
Spark ignition at every burner, and relighting if a flame goes out
Burner caps, heads and ports, and how the flame looks at high and low
The burner valves and knobs inside the cooktop
Controls and electronics on gas and induction models
Whether the cooktop is set up for the type of gas the house uses
Our viewWhen it is unclear which side a problem belongs to, go back first to whoever hooked up the gas. After they confirm the supply is sound, anything still wrong with the cooktop is ours to diagnose.
When the smell appears after installation
In brieftwo of three
I smell gas after a new cooktop installation. What now?
Assume a leak until a qualified person tells you otherwise. Keep your hands off knobs and switches, bring everyone outdoors, and phone the gas company or 911 from the sidewalk. Fresh connections are a usual suspect, and rechecking them is the installer's or plumber's task before any cooktop repair.
three
After the connection passes: what our technician checks
Once the gas side has been signed off, a first service visit on a new cooktop follows a set order. It is the same whether the cooktop was installed last week or has waited since the house was framed.
Read the rating label and the setupFirst the model and serial go into the notes, then the setup is compared with the gas the house is actually supplied with. A mismatch shows up as flames that are too tall, too weak or noisy.
Lift every cap and look at the portsNew kitchens often carry drywall and sanding dust, and it drifts into the burner ports and collects beside the igniters. Caps that sit even slightly off center cause uneven or lazy flames.
Light the burners in turnEvery burner should spark briefly and catch quickly. Clicking that carries on once the flame is burning, or a burner that only catches on the third or fourth attempt, points to the igniter, the spark module or moisture.
Watch the flame from high down to the lowest settingA healthy flame is blue with a clear inner cone. On Wolf's dual-stacked sealed burners the lower ring should hold a steady simmer without going out.
Report back before touching anythingThe technician tells you what turned up, whether it belongs to the cooktop or goes back to the installer, and what a repair would cost if a part is needed. Nothing is changed until you agree.
In briefthree of three
Who checks the gas connection for a new cooktop?
Whoever made the connection, the installer, plumber or gas contractor, should leak-test it, while service up to the meter is the gas company's responsibility. An appliance technician works on the cooktop's own ignition, burners and valves rather than the house piping, so have the connection confirmed first.
four
If the rebuild went to induction
Some families rebuilding here chose a Wolf induction cooktop instead of gas, and we are not going to tell you which is right for your kitchen. What changes is who you call. An induction top is never piped for gas, so the plumber and the gas company drop out of the picture, and its health depends on the electrical circuit and on the electronics under the glass.
On a newly installed induction cooktop, the electrician owns the circuit and the breaker. The appliance side covers the power boards, the cooling fan that runs while zones are on, and the coils that detect a pan. A zone that will not recognize cookware, a top that shuts itself off when several zones are busy, or a fan that roars and stops are faults we diagnose.
Is it normal to notice a whiff of gas for a moment when a burner lights?
Please do not try to judge that yourself. If a burner is slow to catch, a little unburned gas can escape before the flame appears, and that delay is a fault worth booking. If the odor lingers, or you notice it with every knob off, follow the warning above: leave, then call from outside.
The burners keep clicking after we cleaned the cooktop. Is something broken?
Often it is moisture around the igniters or a cap that went back slightly crooked. Let the top dry completely and reseat each cap. Should the clicking carry on once it is bone dry, the spark module or an igniter deserves a look.
Can drywall dust from the build clog the burners?
It can. Fine dust collects in burner ports and around igniters while finishing work goes on. Once the top has cooled, lift off the caps and wipe them; if flames stay uneven or yellow afterward, book a visit so the ports can be cleared properly.
Can you come while the contractors are still working in the house?
Yes, provided the connection has already been leak-tested and somebody can open the door for the technician during visiting hours. It helps if the cooktop is clear of tools and nobody is sanding near it that day.
Will a single visit cover both the cooktop and the hood above it?
It will. You pay $89 for the trip, however many Wolf units get looked at, so list both in your request. If the hood turns out to have a ducting issue rather than a fault, the technician explains what to pass to the contractor.