Wildfire smoke is not just a smell. It carries fine particles, and they find their way into every opening a range has: burner ports, the gap around each igniter, the vents that cool the electronics and the oven's convection fan. On a gas or dual fuel Wolf range, the first concern is combustion. The technician removes the caps, inspects every port, cleans the igniters and watches each burner light, looking for a crisp, even flame that wraps the burner rather than a ragged or yellow one.
The second concern is the parts you cannot see. Behind the front panel sit the valves, the spark module and the wiring that ties them together. On models with electronic controls or an induction surface, a cooling fan pulls room air across the boards, and that air was full of ash for days. The technician checks that the fan runs freely, that the controls respond and that nothing on the boards looks discolored or contaminated. In the oven, the bake and broil elements or burners, the temperature sensor and the convection fan all get a look, and the oven is brought up to temperature to confirm it heats evenly and holds its setting.
Some ranges need nothing beyond careful cleaning and a test. Others turn out to have a part that should be replaced before it fails. In either case you hear what was found in plain words, and any repair is priced before it starts. What we do not do is judge smoke damage for an insurance claim or decide whether a range should be written off; that belongs to your adjuster and your remediation contractor. If they ask what the technician observed, you are welcome to pass on what we told you.
Older Wolf ranges are worth this attention. A heavy, well-made range that came through the fire is often perfectly serviceable once it is cleaned and checked, and we look at older models as willingly as new ones. Where a part for an older range is hard to source, we will tell you rather than guess. The general guide to Wolf range faults, away from smoke, is on our range repair page.